Start at the Sink: Why Compact Kitchens Need a New Plan
Photo: John Alfred Hampton, Public domain, via Wikimedia Commons
Kitchen planning has a favourite diagram. The work triangle links the sink, the hob and the fridge, and it has been taught for decades as the sensible way to arrange a kitchen. It is not wrong, exactly. It is just not always useful in a 2.4m galley in a terraced house, or a compact flat kitchen where the fridge door and the oven door have to negotiate a truce. In small UK kitchens, the triangle can become a line, a squeeze or an obstacle course. The better starting point is often simpler: begin with the sink and plan outward.
The triangle assumes space you may not have
The classic work triangle came from mid-20th-century kitchen planning, when the aim was to reduce unnecessary walking between three main work zones. That is still a good instinct. But the triangle assumes you have enough floor area to move between those zones without colliding with a cupboard door or a bin. In a narrow kitchen, the triangle may be technically present but practically useless. You can have the sink at one end, the hob at the other and the fridge jammed behind the door, and still tick the box on a planner.
Worse, the triangle can encourage bad compromises. A sink gets pushed into a corner because the diagram wants three points. A hob ends up with no landing space because the fridge needed to be within a certain distance. The result looks orderly on paper but feels cramped in use.
The sink is the anchor
In most small kitchens, the sink is the least movable element. Drainage runs are difficult and expensive to change, and the sink often sits under a window for light and ventilation. That makes it a natural anchor. It is also where food preparation begins and ends, where hands are washed, and where the wet zone lives. If you start at the sink, you are starting at the point the kitchen already revolves around.
This does not mean every sink must stay exactly where it is. Sometimes shifting it 300mm along the run is enough to unlock a proper prep area. But the question should be: what does the sink need around it to work? The answer is usually a stretch of prep surface, a sensible place for the bin and a clear route to the hob.
Distances that matter more than geometry
A sink-first plan is less about drawing a perfect triangle and more about removing awkward steps. The prep zone should sit immediately beside the sink, ideally with 600mm to 900mm of clear worktop. That is where you chop, drain and load the dishwasher. If the only prep space is across the room, every meal becomes a relay race.
The hob should be within a step or two of the prep zone. In a compact kitchen, 1.2m is a useful maximum to aim for, though the shape of the room will dictate the reality. You also need landing space on both sides of the hob, even if one side is modest. The bin should be near the prep zone and the sink, because that is where most waste is generated. A bin hidden at the far end of the kitchen is a bin that encourages clutter on the worktop.
The fridge is the wildcard. It needs to be accessible without crossing the cooking zone with a hot pan, and it should not block the main walkway when open. In a small kitchen, a tall fridge at the entrance often works better than an integrated model squeezed into the middle of the run.
Appliances in narrow rooms
In a galley kitchen, keeping the sink and hob on the same run is often the best move. It creates one efficient working line and leaves the opposite run for tall units, the fridge and storage. If the sink and hob must be opposite each other, check the walkway carefully. You need enough space to stand at the sink while someone passes behind, and enough clearance for the oven or dishwasher door to open without trapping anyone.
Dishwashers belong next to the sink, not because a planner says so, but because you will be scraping and loading directly from the prep area. Washing machines in kitchens are a UK reality, but they need door-swing clearance and a sensible route for hoses. Do not put the bin directly behind the oven door or in the only space where a person can stand.
Before-and-after patterns that show the shift
A common before-and-after pattern is the corner sink. Before: the sink is jammed into a corner, the drainer eats the only prep space, the hob is opposite and the bin is in a far cupboard. After: the sink stays in the same drainage zone but moves along the run, a flat drainer groove replaces the bulky drainer, and the recovered worktop becomes a 700mm prep zone. The bin moves into a pull-out beside the prep area, and the hob sits on the same run. Nothing radical, but the kitchen suddenly has a sequence.
Another pattern is the long, thin galley. Before: sink under the window at one end, hob at the other, fridge at the entrance and no landing space near the hob. After: the sink stays put, the dishwasher moves beside it, the hob shifts closer and the tall fridge stays at the entrance. The work triangle is less tidy on paper, but the cook is no longer walking the length of the room to drain pasta.
A sink-first planning checklist
- Mark the drainage and window positions before you move anything.
- Decide the sink position and protect a clear prep zone beside it.
- Give the hob landing space on both sides, even if one side is small.
- Put the bin near prep and sink, not in the furthest cupboard.
- Check dishwasher and oven door swings against walkways.
- Keep the main walkway clear when the fridge is open.
- Test the layout with masking tape on the floor before buying units.
- Measure the route from sink to hob with a full pan in mind.
- Treat the work triangle as a useful idea, not a building regulation.
The work triangle is not the enemy. It is just a starting point that assumes more room than many UK kitchens have. In a compact space, the sink is often the one thing you cannot move far, so start there. The result may not look like the brochure, but it will work like a kitchen.