The Two Quiet Corners: Planning the Alcoves Beside a Chimney Breast
Photo: Jorge Royan, CC BY-SA 3.0, via Wikimedia Commons
Alcoves are the quiet bits of a period home. They sit either side of the chimney breast, usually in the front room or main bedroom, and they tend to get treated in one of two ways: ignored until a random shelf appears, or filled with joinery that looks lovely in a photograph and fights the room in real life.
The Homework view is simple: an alcove is not a problem to be solved with MDF. It is a small piece of architecture with its own depth, damp risk and awkward corners. Get the arithmetic right first and the joiner has a much better chance of giving you something that earns its keep.
Start with usable depth, not the tape-measure fantasy
Measure the alcove at three heights — floor, waist and just below the picture rail — and at the back as well as the front. Old walls lean. Skirting projects. A chimney breast may be 350mm deep at one end and 390mm at the other. The number that matters is not the deepest point. It is the usable depth: the space left after skirting, sockets, radiator pipes, curtain fabric and the clearance you need to open a cupboard door or pull out a chair.
A simple test is to cut a cardboard template to the shape you think you have, then stand it in the alcove. If it rocks, the wall is not flat. If it catches on the skirting, your joinery will need scribing or a plinth. If it leaves no room for a radiator valve, the plan needs rethinking.
Useful rule of thumb: allow 300mm of internal depth for general storage, 350–400mm if you want coat hooks or deeper boxes, and at least 600mm for a desk worktop. If the alcove is shallower than that, let the desk project into the room rather than pretending a 400mm shelf is a workspace.
The damp question comes before the desk question
Chimney breasts and their neighbouring alcoves are prone to damp for boring, familiar reasons: blocked chimneys, failed rainwater goods, high ground levels, trapped moisture in solid walls and vents that have been papered over. Before you commission anything, look for tide marks, salts, blistering paint, musty smells and dark patches near the skirting. Check the chimney itself is ventilated, especially if it is unused. Do not let a cupboard or a bank of shelves seal off an air brick or a vent.
If there is active damp, stop. Joinery is not a damp-proof course. Fix the source, let the wall dry, and only then think about cabinets. A good joiner will leave a small air gap behind solid-backed furniture and may suggest a vented back panel. That is not fussiness; it is the difference between storage and a science experiment.
Four uses that usually earn their keep
Built-in storage is the classic answer, and for good reason. Cupboards below with adjustable shelves above can swallow books, board games, spare bedding and the general clutter of family life. Keep the lower cupboards shallow enough to reach the back, and consider drawers rather than deep cupboards for awkward corners.
A desk works best in a wider alcove, ideally one with a window nearby. Plan cable routes before the joiner arrives, not after. A single socket in the wrong place will dictate the furniture layout for years. If a radiator sits under the alcove, a floating desk can work, but check heat and clearance; you do not want to cook your knees in January.
Shelving is the most flexible option. Adjustable shelves at 250–300mm deep will take most books and files. Deeper shelves become display ledges for things you cannot reach. If you want a built-in look without the cost, a simple timber batten system painted to match the wall can be surprisingly good.
Leaving one empty is a legitimate design decision. An empty alcove can take a slim bookcase, a chair, a floor lamp or a Christmas tree without committing the room to a joinery scheme. In small rooms, one filled alcove and one left open often feels calmer than a symmetrical wall of cupboards.
Bespoke versus off-the-shelf, without the sales patter
| Option | Best for | Watch out for |
|---|---|---|
| Bespoke joinery | Irregular walls, awkward corners, a fitted look | Cost, lead time, and the temptation to overfill |
| Modular off-the-shelf | Straight walls, tight budgets, quick installs | Gaps at the wall, limited depth choices, filler panels that look like filler panels |
| Hybrid | Standard carcasses with custom doors or plinths | Needs a patient joiner and early coordination |
Bespoke is not automatically better. It is better when the walls are out of plumb, the alcove is an odd shape or you need a specific internal layout. Off-the-shelf is better when the space is reasonably square and you want to spend the money elsewhere. The middle path — standard carcasses, scribed filler panels and a painted finish — often gives the fitted look without the full joinery invoice.
The pre-joinery checklist
- Measure depth at floor, waist and shoulder height, at both the front and back of the alcove.
- Check for plumb and level; note any lean or bowing.
- Locate sockets, switches, radiator pipes and any old gas or chimney vents.
- Test for damp and salts; smell the skirting area.
- Confirm the chimney is ventilated if it is not in use.
- Decide whether the radiator stays, moves or goes.
- Check skirting height and whether it will be removed or scribed around.
- Plan lighting and cable routes before the first fix.
- Agree who paints, who fills and who makes good the wall.
- Leave a written brief with dimensions, not just a mood board.
Decide what the room needs, not what the alcove wants
The best alcove schemes are a little boring in the planning stage and quietly useful afterwards. They hold the things you actually own. They leave the radiator working. They do not block the vent. They make the chimney breast look intentional rather than like an obstacle.
So before the joiner arrives, do the arithmetic. Measure twice, check for damp once more, and resist the urge to fill both sides simply because they are there. Two quiet corners can do a lot of work — but only if you decide what work you want them to do.